▲
Important: Press
and buttons at the same time,then press the power button
when parameter value is 0, it will start with zero. When parameter value is 1, it will start with non-zero.
(Zero start: When starting, the E-scooter in a stationary case, press the accelerator to start driving.)
(Non-zero start: When starting, the scooter is static, press the accelerator and the E-scooter does not
work, push the e-scooter manually to start driving , the E-scooter works. factory default is non-zero
start. )
You have to manually move the E-scooter with your foot before the accelerator handle are working.
9. Operation Guide
Rear Brake
▼
and select P3 mode,