Table of Contents
Advertisement
4)
Dual action safety knob
Press the red button to fold or unfold the Electric scooter.
Rotate the safety knob to the "FOLDING" position on the left or right, then press the red button to fold your Electric
scooter. Rotate the safety knob to the "RIDING" position, you can start your driving.
WARNING
The knob must be set to the "RIDING" position when riding for safety issue to prevent unintended folding the Electric
scooter.
3. Handle bar assembly
1)
Parts inside the packaging: two handlebars
2)
Change display angle: Loosen the screw
handlebar meter screen upwards while the
Remember to tighten screws again
3)
Before operating the electric scooter, turn the handlebar grips, and carefully check all the components to make sure
that the steering is correctly installed as described above, and that all connecting parts are secure and fully
functional.
Fold-Unfold Position
Figure 1
on the handlebar, and rotate the axle
and display screen turn inwards in a horizontal level.
5
to make the
Figure 2
Advertisement
Table of Contents
