Completely Blank Pages Are Output; The Printed Image Is Light Or Faint - Epson EPL-N7000 Reference Manual

Completely blank pages are output

Cause
The printer may have loaded
more than one sheet at a time.
There may be no toner left in
the imaging cartridge.
The problem may be with your
application or interface cable.
The Paper Size setting may be
incorrect.

The printed image is light or faint

Cause
Your paper may be moist or
damp.
The Toner Save mode may be
on.
314
Troubleshooting
What to do
Remove the paper stack and fan it. Tap
it on a flat surface to even the edges.
Then reload the paper.
If the message on the LCD panel or in
the EPSON Status Monitor 3 indicates
that the amount of toner is low, see
"Replacing the imaging cartridge" on
page 258.
Print out a status sheet. See "Printing a
Status Sheet" on page 304. If a blank
page is ejected, the problem may be
with the printer. Turn off the printer
and contact your dealer.
Make sure the correct paper size is set
in the Tray menu on the control panel.
What to do
Do not store your paper in a humid or
damp environment.
Turn off the Toner Save mode using the
printer driver or the printer's control
panel menus.