Epson EPL-N7000 Reference Manual page 124

Installing the printer driver for the parallel interface
Follow these steps to install the printer driver for the parallel
interface:
1. Insert the printer software CD-ROM into your CD-ROM
drive.
2. Click Start, then Settings, and finally Printers.
3. Double-click the Add Printer icon.
4. The Add Printer Wizard will be displayed. Follow the
on-screen instructions until the screen asking you to select the
printer model is displayed.
5. Click Have Disk and specify the path to the appropriate INF
file necessary for installation. If your CD-ROM drive is D:, the
path will be D:\ADOBEPS\ENGLISH\WINNT4\PS_SETUP
(change the drive letter as needed for your system).
6. Select the INF file for the version of the Windows operating
system that you are running and continue with the
installation according to the on-screen instructions.
7. When installation is done, click Finish.
Installing the printer driver for the network interface
Follow these steps to install the printer driver for the network
interface:
1. Insert the printer software CD-ROM into your CD-ROM
drive.
2. Click Start, then Settings, and finally Printers.
3. Double-click the Add Printer icon.
Using the PostScript Printer Driver (Windows)
4
4
4
4
4
4
4
4
4
4
4
4
113