Using Appletalk Under Windows 2000 Or Windows Nt 4.0 - Epson EPL-N7000 Reference Manual

If the printer driver is preinstalled in the client, you need to
select the new printer driver or the current printer driver. When
the prompt to select the printer driver appears, select the printer
driver according to the message.
If the additional driver for Windows NT 4.0 is preinstalled in a
Windows XP or 2000 printer server, go to the next step.
If the additional driver for Windows NT 4.0 is not installed in
a Windows XP or 2000 printer server, or the printer server's
operating system is Windows Me, 98, or 95, go to "Installing
the printer driver from the CD-ROM" on page 203.
5. Select whether to use the printer as the default printer or not,
and then click Next.
6. Click Finish.
Using AppleTalk Under Windows 2000 or
Windows NT 4.0
Use the following settings if your machine is running Windows
NT 4.0 or Windows 2000, and the printer is connected through an
optional network card using the AppleTalk protocol:
Use SelecType to set the Emulation Mode-AUX item to PS3.
Using the default Auto setting will cause an extra, unneeded
page to be printed.
On the Device Settings sheet of the printer's Properties dialog
box, make sure that SEND CTRL-D Before Each Job and
SEND CTRL-D After Each Job are set to No.
TBCP (Tagged binary communications protocol) cannot be
used as the Output Protocol setting.
202
Setting Up Your Printer on a Network