Epson EPL-N7000 Reference Manual page 179

Note:
Make sure to choose AppleTalk. Do not choose EPSON
AppleTalk, because it cannot be used with the PostScript 3 printer
driver.
4. Select your printer name from the Name list, and then select
Auto Select in the Printer Model pop-up list.
Note:
By default, the six-digit MAC address is displayed after the printer
name.
5. Click Add. The installation program starts communicating
with the printer.
When communication is established and configuration is
completed, your printer is automatically added to the Printer
List.
6. Quit Print Center.
IP Printing
Follow these steps to select the printer when it is connected using
IP Printing:
Note:
Make sure to specify ASCII as the data format in the application. Binary
data cannot be printed properly when using IP Printing.
168
Using the PostScript Printer Driver (Macintosh)