Epson EPL-N7000 Reference Manual page 135

5. Click Have Disk and specify the path to the appropriate INF
file necessary for installation. If your CD-ROM drive is D:, the
path will be D:\ADOBEPS\ENGLISH\WIN2K-XP\PS_SETUP
(change the drive letter as needed for your system).
6. Select the INF file for the version of the Windows operating
system that you are running and continue with the
installation according to the on-screen instructions.
7. When installation is done, click Finish.
Installing the printer driver for the USB interface
Follow these steps to install the printer driver for the USB
interface:
1. Without connecting the printer to the computer, turn on both
the computer and the printer.
2. Once Windows has started, connect the computer to the
printer with a USB cable.
3. The Add New Hardware Wizard will launch automatically.
Click Next to start the installation of the USB printer driver.
4. After the USB printer driver installation is done, the Add
Printer Wizard will launch automatically. Follow the
on-screen instructions to continue with the installation until
the screen asking you to select the printer model is displayed.
5. Click Have Disk and specify the path to the appropriate INF
file necessary for installation. If your CD-ROM drive is D:, the
path will be D:\ADOBEPS\ENGLISH\WIN2K-XP\PS_SETUP
(change the drive letter as needed for your system).
6. Select the INF file for the version of the Windows operating
system that you are running and continue with the rest of the
installation according to the on-screen instructions.
124
Using the PostScript Printer Driver (Windows)