Problems Printing In The Postscript 3 Mode; Windows Users - Epson EPL-N7000 Reference Manual

There may be no paper in the
cassettes.
The size of loaded paper
differs from the control panel
setting.
Too many sheets may be
loaded in the MP tray or paper
cassettes.
If paper does not feed from the
optional paper cassette unit,
the unit may not be installed
properly.

Problems Printing in the PostScript 3 Mode

The problems listed in this section are those that you may
encounter when printing with the PostScript driver. All
procedural instructions refer to the PostScript printer driver that
shipped with your printer.

Windows users

See the appropriate sections below for resolutions to the various
problems that you may experience when printing in the
PostScript 3 mode from a computer running one of the supported
Windows operating systems.
318
Troubleshooting
Load paper.
Make sure that the correct paper size is
set in the control panel's Paper Source
and MP Tray Size settings.
Make sure that you have not tried to
load too many sheets of paper. For the
maximum paper capacity for each
paper source, see "Paper" on page 366.
For instructions on installing the unit,
see "500-Sheet Universal Paper Cassette
Unit A3" on page 206.