Windows Server 2003 - Epson EPL-N2550 Network Manual

3. Run the command prompt and enter the following command.
NET USE printer port: \\NetBIOS name of network
interface\Device name of network interface
Selecting the port
1. Click Start, point to Settings, and then select Printers.
2. Right-click the printer icon and select Properties.
3. Click the Details tab and select the port you have set with the
NET USE command.

Windows Server 2003

For Windows Server 2003, the printer driver installation
procedure differs depending on the printing method you prefer.
Epson recommends printing with EpsonNet Print. See "For
Windows XP/Server 2003/2000/NT 4.0 Users" on page 173.
LPR printing
Note:
If you are using EpsonNet Print, the setup procedure is different. See
"About EpsonNet Print" on page 171 for details.
1. Click Start, and then select Printers and Faxes.
2. Double-click the Add Printer icon to start the Add Printer
wizard, and then click Next.
3. Click Local printer attached to this computer, clear the
Automatically detect and install my Plug and Play printer
check box, and then click Next.
62
How To