Epson EPL-N2550 Network Manual page 163

Set Using Automatic
Private IP Addressing
(APIPA)
Set Using PING
DNS Server Address Settings
Items
Acquire DNS Server
Address Automatically
DNS Server Address
Host Name and Domain Name Settings
Items
Acquire Host Name and
Domain Name
Automatically
Host Name
Domain Name
Register Network Interface
Address to DNS Server
Select Enable to get a private address
between 169.254.1.1 and 169.254.254.254
automatically when an IP address cannot
be obtained by the DHCP server; otherwise,
select Disable.
Enables or disables IP address setting using
the ping command.
Explanations
Select either Enable or Disable to acquire
the DNS server address from the DHCP
server.
Enter the DNS server address. When the
DHCP server does not respond even Enable
is selected for Acquire DNS server address
automatically, the DNS server address set
here is used.
Explanations
Select either Enable or Disable to acquire
the host name and domain name from the
DHCP server.
Enter the host name supported by Dynamic
DNS (between 2 and 63 characters). The
total number of characters of the host name
and the domain name must not exceed 251.
Leave it blank or enter two or more
characters of the domain name. The total
number of characters of the host name and
the domain name must not exceed 251.
Select Enable if you want to send the host
name and the domain name to the DHCP
server that supports Dynamic DNS update to
request for DNS dynamic updates.
Network Software
3
3
3
3
3
3
3
3
3
3
3
3
163