Epson EPL-N2550 Network Manual page 102

Configuring for NetWare using EpsonNet Config
1. Turn on your printer.
2. Load the print server from the file server's system console
which the print queue volume is set.
>LOAD PSERVER print server name you set using
NWAdmin
3. Configure the network interface using EpsonNet Config. See
the EpsonNet Config User's Guide for details.
If you use the NetWare objects that are already created, you
can use EpsonNet Config with Web Browser too. See
"NetWare" on page 161 for details.
Using the EpsonNet NDPS Gateway
This section contains instructions on printing using Novell
Distributed Print Services
®
NetWare
the new generation print services of NetWare.
Note:
❏ Banners cannot be printed with NDPS.
❏ The Status Monitor utility cannot be used with NDPS.
❏ Bind the IP or both IP or IPX protocols on the NetWare server that
runs NDPSM.NLM and EPSONGW.NLM.
Check the following points before starting.
❏ Install the appropriate client software, such as Novell Client
for Windows 95/98 version 3.4, Novell Client for Windows
NT/2000 version 4.8, or Novell Client for Windows XP
version 4.9 on client workstations. Make sure they install
NDPS.
102
How To
5.x/6.0. Novell Distributed Print Services (NDPS) is
® ®
(NDPS ) with Novell
®