Chapter 3 Network Software; Epsonnet Config For Windows; About Epsonnet Config - Epson EPL-N2550 Network Manual

Chapter 3
Network Software

EpsonNet Config for Windows

About EpsonNet Config

EpsonNet Config is a Windows-based configuration software for
administrators to configure the network interface for TCP/IP,
NetWare, MS Network, AppleTalk, IPP, and SNMP.
Note:
❏ Be sure to use EpsonNet Config included on the Network Utilities
CD-ROM shipped with this product.
❏ EpsonNet Config installed on Windows XP/Server 2003 does not
support NetBEUI as a search protocol because officially the
NetBEUI protocol is not supported on Windows XP/Server 2003.
Note for users of printers supporting NetWare queue-based
printing:
❏ If you are using the printer in a dial-up environment without
running NetWare, clear the Use NetWare check box on the
NetWare screen. If this check box is selected, the extra account may
be charged when you use the dial-up router.
❏ When configuring the network interface for NetWare, use the IPX
protocol and log in to the NetWare server or the NDS context with
supervisor privileges.
❏ When you configure the network interface for NetWare 5.x, you
must log in to the NetWare server using an IPX connection. If you
log in to the NetWare server using an IP connection, the NetWare
screen and the IPX trap setting of SNMP are not available.
Network Software
3
3
3
3
3
3
3
3
3
3
3
3
131