Epson EPL-N2550 Network Manual page 110

7. The Select Printer Drivers dialog box appears. Select an
appropriate printer driver for Windows Me/98 and Windows
2000/NT 4.0. Be sure to select the correct printer driver for
your printer from the appropriate menus. Windows 3.1 is not
supported.
8. Click Continue.
9. Confirm the Printer Agent that you have just created.
In NetWare Administrator, double-click the NDPS Manager
object and click Printer Agent List. Check that the status of the
Printer Agent you have just created is "Idle".
Configuring for NetWare using EpsonNet Config
Follow the steps below if you want to use the printer in IPX
network.
Note:
Be sure that the one of the following clients is installed on your computer:
Novell Client 32, Novell IntranetWare Client, or Novell Client.
1. Turn on your printer.
2. From any NetWare client, log in to the target NetWare server
as an ADMIN.
3. Run EpsonNet Config from the Start menu. See "Accessing
the EpsonNet Config User's Guide" on page 134 for details.
If the IP address of the printer is already assigned, you can
use EpsonNet Config with Web Browser too. See "NetWare"
on page 161 for details.
Setting the printer on client workstations
After configuring the network interface, set up the printer on
client workstations.
110
How To