Epson EPL-N2550 Network Manual page 156

LF Function
Tray Assign
Set button
Refresh button
GL2 Emulation
Items
Emulation
GL-Mode
Scale
Origin
Pen
End
Join
Pen (0 to 6)
Set button
Refresh button
156
Network Software
Select LF (line-feed) or CR+LF
(carriage-return/line-feed) operation to add
a line feed to each carriage return it
receives.
Select the tray assigning from 4, 4K, or 5S.
When 4, 4K, and 5S are selected, LaserJet 4
Compatible, LaserJet 4000/5000/8000
Compatible, and LaserJet 5 Si Compatible
are available respectively.
Saves any changes.
Clears any changes and reloads the
previous settings.
Explanations
Select GL2.
Select whether the emulation is similar to the
GL/2 or the HP LaserJet 4 emulation of the
GL/2.
Select whether the output from the software
is scaled, and if so, how the scale factor is
calculated: based on the output paper size
of the software application.
Select whether the logical origin of the
"plotter" is from the corner or the center of
the paper.
Select the logical "pen" which "plots" the
drawing.
Select the way in which lines end.
Select the way in which lines are joined.
Select the thickness of the seven "pens"
used to make the printout.
Saves any changes.
Clears any changes and reloads the
previous settings.