Epson EPL-N2550 Network Manual page 143

14. Click Submit and then enter the password to update the
settings. See "Password" on page 171 for more information on
setting the password.
Note:
If you have set the Administrator Name on the Administrator
screen, enter the administrator name for the user name.
15. If the message "Configuration change is complete!" appears
on your screen, the update is complete. Do not exit the Web
browser and do not send a job to the printer until this message
appears. Follow the on-screen instructions to reset the printer.
Note:
❏ Since the new IP address becomes available after the printer is
reset, you need to restart EpsonNet Config by entering the new
IP address.
❏ Only changes on the page where you press the Submit button
take effect.
Network Software
3
3
3
3
3
3
3
3
3
3
3
3
143