Plugging In The Printer - Epson ColorPage EPL-C8000 Setup Manual

Plugging in the Printer

1. Check the label on the left side of the printer to make sure the
voltage required by the printer matches that of the electrical
outlet it will be plugged into. Also, make sure that you have
the correct power cable for your power source.
c
2. Make sure the printer is turned off. It is off when the N side
of the power switch on the left side of the printer is pushed in.
3. Connect the power cord to the AC inlet on the left side of the
printer.
4. Plug the power cord into a properly grounded electrical
outlet.
50
Plugging in the Printer
Caution:
It is not possible to change the printer's voltage. If the
required voltage and your outlet voltage do not match,
contact your dealer for assistance. Do not plug in the power
cord.