Assembling the Printer
Before assembling the printer, make sure that all protective
materials packed around and inside your printer are removed.
Follow the instructions in the Unpacking Guide to remove these
materials.
Installing the Expansion Tray
The expansion tray is used for the wide-size paper setting. To
install the expansion tray on the right side of the printer, follow
the instructions below.
1. Hold the expansion tray vertically. Then insert its right leg
into the hollow of the MP tray to fit the pin on the leg to the
hole on the MP tray. Make sure the gears of both trays fit
properly.
.
14
Assembling the Printer