Installing The Face-Up Tray - Epson ColorPage EPL-C8000 Setup Manual

2. While holding the expansion tray vertically, insert the left leg
into the MP tray until the pin clicks in the hole on the MP tray.

Installing the Face-Up Tray

Install the face-up tray to the left side of the printer as follows:
1. Locate the output slot on the left side of the printer.
2. Squeeze the metal spring on the right side of the face-up tray
so that the end of the spring is folded down against the tray.
(as shown in the illustration below)
Assembling the Printer
15