Installing The Photoconductor Unit - Epson ColorPage EPL-C8000 Setup Manual

Installing the Photoconductor Unit

Before installing the fuser oil roll, read the following precautions:
When installing the photoconductor unit, avoid exposing it
to room light any longer than necessary.
Be sure not to scratch the surface of the drum. Also avoid
touching the drum, since oils from your skin can permanently
damage its surface and may affect print quality.
To install the photoconductor unit:
1. Open the front cover.
2. Turn the large lever counterclockwise 90 degrees.
22
Assembling the Printer