Installing Memory Module
You can increase printer memory up to 256 MB (including printer
default 64 MB) by installing the optional DIMM (Dual In-line
Memory Module). This printer has two slots for the optional
DIMMs.
You can purchase DIMMs from various vendors. Be sure to meet
the following requirements:
DRAM type
Capacity
Type
Access speed
Height
Caution:
c
Before you install the module, be sure to discharge any static
electricity by touching a grounded piece of metal. Otherwise, you
may damage static-sensitive components.
Warning:
w
Be careful when working inside the printer as some pieces are
sharp and may cause injury.
Synchronous Dynamic RAM Double In-line
Memory Module (SD RAM DIMM)
32MB, 64MB, or 128MB
168-pin type, 64 bit, with SPD
66.66 MHz or higher (15 ns or less)
Less than 40 mm
Installing the Options
39