System Configuration - Dell Latitude 7300 Service Manual

Table 3. General (continued)
Option
UEFI Boot Path Security
Date/Time

System configuration

Table 4. System Configuration
Option
SATA Operation
Drives
SMART Reporting
USB Configuration
Dell Type-C Dock Configuration
Thunderbolt™ Adapter Configuration
90 System setup
Description
Allows you to control whether the system prompts the user to
enter the Admin password when booting to a UEFI boot path.
Click one of the following options:
● Always, Except Internal HDD—Default
● Always, Except Internal HDD & PXE
● Always
● Never
Allows you to set the date and time. The change to the
system date and time takes effect immediately.
Description
Allows you to configure the operating mode of the integrated
SATA hard-drive controller.
Click one of the following options:
● Disabled
● AHCI
● RAID On—Default
NOTE: SATA is configured to support RAID mode.
These fields let you enable or disable various drives on board.
The options are:
● SATA-1
● SATA-2
● M.2 PCIe SSD-0
● M.2 PCIe SSD-1
This field controls whether hard drive errors for integrated
drives are reported during startup.
The option is disabled by default.
Allows you to enable or disable the internal/integrated USB
configuration.
The options are:
● Enable USB Boot Support
● Enable External USB Ports
All the options are set by default.
NOTE: USB keyboard and mouse always work in the BIOS
setup irrespective of these settings.
Allows you to connect to Dell WD and TB family of
docks(Type-C Docks) independent of USB and thunderbolt
adapter configuration.
This option is enabled by default.
Allows you to enable or disable Thunderbolt options: