11. Route the speaker cable along the tab [1] beside the LED daughterboard and connect it to the system board [2].
12. Route the LED daughterboard FFC cable [3] over the rubber routing channel on the coin cell and connect it to the system
board [4].
1. Install the
display assembly
2. Install the
power adapter
3. Install the
heatsink-fan
4. Install the
WLAN
card.
5. Install the SSD.
6. Install the memory.
7. Install the battery.
8. Install the
base
cover.
9. Follow the procedure
port.
assembly.
after working inside your
computer.
Removing and installing components
75