NOTE:
This procedure illustrates a M.2 2280 SSD. M.2 2230 SSD requires a special bracket and plate to secure it to the
palmrest assembly.
1. Install the battery.
2. Install the
base
cover.
3. Follow the procedure
WLAN card
Removing the WLAN card
1. Follow the procedure in
2. Remove the
base
cover.
3. Remove the battery.
1. Remove the single (M2x3) screw that secures the metal bracket to the WLAN card [1].
2. Remove the metal bracket from over the WLAN card antennae connector [2].
3. Disconnect the WLAN antennae cables from its connectors on the WLAN card [3].
4. Sightly lift and slide the WLAN card from the slot on the system board [4].
after working inside your
before working inside your
computer.
computer.
Removing and installing components
29