System Configuration - Dell Latitude 7400 Setup And Specifications

Table 22. General(continued)
Option
Date/Time

System configuration

Table 23. System Configuration
Option
SATA Operation
Drives
SMART Reporting
USB Configuration
Dell Type-C Dock Configuration
Thunderbolt™ Adapter Configuration
22 System setup
Description
Allows you to set the date and time. The change to the system
date and time takes effect immediately.
Description
Allows you to configure the operating mode of the integrated
SATA hard-drive controller.
Click one of the following options:
• Disabled
• AHCI
• RAID On—Default
NOTE: SATA is configured to support RAID mode.
These fields let you enable or disable various drives on board.
The options are:
• SATA-1
• SATA-2
• M.2 PCIe SSD-0
• M.2 PCIe SSD-1
This field controls whether hard drive errors for integrated drives
are reported during startup.
The option is disabled by default.
Allows you to enable or disable the internal/integrated USB
configuration.
The options are:
• Enable USB Boot Support
• Enable External USB Ports
All the options are set by default.
NOTE: USB keyboard and mouse always work in the
BIOS setup irrespective of these settings.
Allows you to connect to Dell WD and TB family of docks(Type-C
Docks) independent of USB and thunderbolt adapter configuration.
This option is enabled by default.
Allows you to enable or disable Thunderbolt options:
• Thunderbolt (Enabled by Defualt)
• Enable Thunderbolt Boot Support
• Enable Thunderbolt (and PCIe behind TBT) Pre-boot
With following security levels :
• No Security
• User Authentication (Enabled by Defualt)
• Secure Connect