1. Install the
display
panel.
2. Install the hinges.
3. Install the
display
bezel.
4. Install the
hinge cap
5. Install the
display assembly
6. Install the battery.
7. Install the
base
cover.
8. Follow the procedure
System board
Removing the system board
1. Follow the procedure in
2. Remove the
base
cover.
3. Remove the battery.
4. Remove the memory.
5. Remove the SSD.
6. Remove the
WLAN
card.
7. Remove the
heatsink-fan
8. Remove the
power adapter
9. Remove the
display
assembly.
NOTE:
System board can be removed with heatsink assembly installed, this simplifies the procedure in an event of power
button, keyboard and palmrest assembly replacements.
1. Disconnect the LED daughterboard ribbon cable from the system board [1].
2. Unroute the ribbon cable from the rubber routing channel on the coin cell [2].
3. Disconnect the speaker cable from the system board [3].
66
Removing and installing components
after working inside your
before working inside your
assembly.
port.
computer.
computer.