7. Remove the
heatsink-fan
8. Remove the
power adapter
9. Remove the speaker.
10. Remove the
display
assembly.
11. Remove the
system
board.
1. Remove the two (M2x2.5) screws, that secure the power-button board to the palmrest assembly [1].
2. Remove the power-button board from its slot, in the palmrest assembly [2].
NOTE:
Power-button board with Finger Print Reader (FPR), has a cable that
Figure 3. Power-button board without FPR
78
Removing and installing components
assembly.
port.
disconnects
from the system board.