Table of Contents
Advertisement
Table 3. General (continued)
Option
Date/Time
System configuration
Table 4. System Configuration
Option
Integrated NIC
SATA Operation
Drives
SMART Reporting
USB Configuration
106
BIOS setup
Description
Click one of the following options:
● Always, Except Internal HDD—Default
● Always
● Never
Allows you to set the date and time. The change to the
system date and time takes effect immediately.
Description
Allows you to configure the integrated network controller.
Click one of the following options:
● Disabled
● Enabled
● Enabled w/PXE—Default
Allows you to configure the operating mode of the integrated
SATA hard-drive controller.
Click one of the following options:
● Disabled
● AHCI
● RAID On—Default
NOTE:
SATA is configured to support RAID mode.
Allows you to enable or disable various drives on board.
The options are:
● SATA-0
● SATA-1
● SATA–4
● M.2 PCIe SSD-0
● M.2 PCIe SSD-1
All the options are set by default.
This field controls whether hard drive errors for integrated
drives are reported during system startup. This technology is
part of the SMART (Self Monitoring Analysis and Reporting
Technology) specification. This option is disabled by default.
● Enable SMART Reporting
Allows you to enable or disable the internal/integrated USB
configuration.
The options are:
● Enable USB Boot Support
● Enable External USB Ports
All the options are set by default.
Advertisement
Table of Contents
