Table of Contents
Advertisement
General screen options
This section lists the primary hardware features of your computer.
Option
Description
System Information
•
•
•
•
Battery Information Displays the battery status and the type of AC adapter connected to the computer.
Boot Sequence
Boot Sequence
Boot List Options
Advanced Boot
This option allows you the legacy option ROMs to load. By default, the Enable Legacy Option ROMs is disabled.
Options
Date/Time
Allows you to change the date and time.
System Configuration screen options
Option
Description
Integrated NIC
Allows you to configure the integrated network controller. The options are:
•
•
•
SATA Operation
Allows you to configure the internal SATA hard-drive controller. The options are:
•
•
Drives
Allows you to configure the SATA drives on board. All drives are enabled by default. The options are:
•
System Information: Displays BIOS Version, Service Tag, Asset Tag, Ownership Tag, Ownership Date,
Manufacture Date, and the Express Service Code.
Memory Information: Displays Memory Installed, Memory Available, Memory Speed, Memory Channels Mode,
Memory Technology, DIMM A Size, DIMM B Size.
Processor Information: Displays Processor Type, Core Count, Processor ID, Current Clock Speed, Minimum
Clock Speed, Maximum Clock Speed, Processor L2 Cache, Processor L3 Cache, HT Capable, and 64-Bit
technology.
Device Information: Displays Primary Hard Drive, SATA-0, M.2PCIe SSD-0, Dock eSATA Device, LOM MAC
Address, Video Controller, Video BIOS Version, Video Memory, Panel Type, Native Resolution, Audio Controller,
WiFi Device, WiGig Device, Cellular Device, Bluetooth Device.
Allows you to change the order in which the computer attempts to find an operating
system. The options are:
•
Windows Boot Manager
•
UEFI: Hard drive details
Allows you to change the boot list option:
•
Legacy
•
UEFI (enabled by default)
Disabled
Enabled
Enabled w/PXE: This option is enabled by default.
Disabled
AHCI
:This option is enabled by default.
SATA-0
System Setup
29
Advertisement
Table of Contents
