6-4
Accessing the Inside of the System
Removing the Chassis Cover
You will need to access the inside of the system to complete certain procedures
such as replacing fans.
Removing the Chassis Cover
If working with componenets such as memory, processors or heatsinks, start by
shutting the system down and disconnecting the AC power cord.
1. Depress the two release buttons on both sides of the cover.
2. Slide the cover toward the rear of the chassis
3. Lift the cover off the chassis.
Figure 6-4. Accessing the Inside of the System
1
1
Caution: Except for short periods of time, do NOT operate the server without the
cover in place. The chassis cover must be in place to allow proper airflow and prevent
overheating.
Chapter 6: Advanced Chassis Setup
1
2
1
1
6-5
1
3