6. Install the Antennas
1. Mount the antennas on the roof of the vehicle. If your configuration requires two antennas, ensure
they are separated by at least 20 cm (7.9 inches) to comply with FCC regulations.
2. If the roof of the vehicle is not metal, installation of a ground plane is necessary for optimum
antenna performance (please consult a qualified mobile radio shop).
3. Antennas supplied by Sierra Wireless will be labeled with the supported frequency ranges of each
antenna lead and should be connected as shown below:
3G/4G Cellular
694-894 / 1700-2700 MHz
WAN1-A (MAIN)
WAN1-B (DIVERSITY)
Figure 12 - oMG 500 Rear Ports
If your oMG 500 was ordered with additional LAN or WAN radio options, consult the oMG 500
Installation Guide listed in Section 1.1 for additional connection options.
oMG-ED-130504
GPS
Rev 1.2
Wi-Fi LAN
2.4–2.5 / 4.9 GHz
LAN1-A (MAIN) LAN2-A
(DIVERSITY)
April 29, 2015
14