Install The Sim Into The Omg; Figure 3 - Location Of Screws And Removal Of Cover; Figure 4 - Location Of The Sim Tray; Figure 5 - Correct Orientation Of The Sim Card - Sierra Wireless oMG 500 Quick Setup Manual

3. Install the SIM into the oMG

Warning:
Use ESD protection including a grounded wrist strap.
1. Open the oMG cover by removing the four Philips screws around the bottom edge and gently
lifting it away from the base:

Figure 3 - Location of screws and Removal of Cover

2. Locate the primary SIM tray and use a pen or small screwdriver to press the ejection button:

Figure 4 - Location of the SIM Tray

3. Place the SIM into the tray ensuring that it sits flat and the connection pads are facing upwards:

Figure 5 - Correct Orientation of the SIM Card

oMG-ED-130504 Rev 1.2 April 29, 2015 9