Table of Contents
Advertisement
Server models with eight 3.5-inch simple-swap drives (software RAID)
Use this section to understand the cable routing for server models with eight 3.5-inch simple-swap drives
(software RAID).
Note: Ensure that all cables are routed through the correct cable clips.
Figure 26. Cable routing for server models with eight 3.5-inch simple-swap drives (software RAID)
Cable
First simple-swap disk drive cable
Second simple-swap disk drive
cable
ThinkSystem ST250 Setup Guide
40
From
SAS connector on the backplate
SAS connector on the backplate
To
Backplane 1 power connector on the
1
system board
SATA 0–3 connector on the system
4
board
SATA 4–7 connector on the system
2
board
Backplane 2 power connector on the
3
system board
Advertisement
Table of Contents
