Vidicode V-Tap Manual page 55

Configuration of the V-Tap for FRITZ!Box recording
By default, the FRITZ!Box has the IP address 192.168.178.1.
In some installations, where the FRITZ!Box is placed behind a router in
an existing LAN, the IP address is 192.168.188.1. In that case, all the
addresses 192.168.178.xxx must be replaced by 192.168.188.xxx in the
following examples.
The IP address 192.168.178.222 is chosen as the proxy server address for
the V-Tap. The Proxy settings in the V-Tap must then look like this:
NOTE 1:
The V-Tap VoIP-2/3 needs a Proxy license ! (see also Notes at the end)
NOTE 2:
When using the V-Archive software, the "Tunnel Server Address" in the
V-Tap must be set to the IP address of the PC.
V-Tap VoIP Manual EN v3.23 Aug 2021 © 2017-2021 Vidicode 55