Table of Contents
Advertisement
7 Special Modes of Operation
In the following paragraphs, the connection schemes for some situations
are shown in a drawing. The settings to change these different modes of
operation are also described.
NOTE: Only ports PHONE2 and PHONE3 are suitable to connect an
external Power over Ethernet (PoE) loop.
The V-Tap itself does not generate PoE.
7.1 Default Switch mode
This is the default startup situation of the V-Tap VoIP. The unit functions
as a normal 4-port switch; all ports can be used for web access, Tunnel
connection and VoIP data.
V-Tap VoIP Manual EN v3.23 Aug 2021
© 2017-2021 Vidicode
46
Advertisement
Table of Contents
Need help?
Do you have a question about the V-Tap and is the answer not in the manual?
Questions and answers