Web Interface And Settings; Access & Ip Address - Vidicode V-Tap Manual

3 Web interface and Settings

The first step to access the web interface of the V-Tap VoIP is to connect
a network cable to any of the 4 LAN ports on the unit. The other side of
the cable can be connected to a LAN switch or directly to a PC.
3.1 Access & IP address
By default, the V-Tap has DHCP enabled and can be accessed with any
browser by entering the address
are the last 4 digits of the MAC address, found on the bottom:
Default address:
Default Username: admin
Default Password:
If no DHCP is available, it can be disabled temporary by pressing the
button for 1 second. The LED's will flash shortly and the V-Tap can be
accessed on the IP address 192.168.55.66
See also Disable DHCP temporary
It is also possible to set a new fixed IP address by using an SD card:
Defining a fixed IP address with an SD card:
. Create the text file "IP" on your PC.
. The first line in this file must hold the IP address.
. The second line is optional and can hold the IP mask.
. Copy "IP.TXT" to the root directory of an SD card.
. Insert the SD card into the V-Tap unit.
. The IP address has now changed and can be accessed.
. The file "IP.TXT" is deleted from the card by the V-Tap.
. Note: The IP address 0.0.0.0 enables DHCP on the V-Tap.
V-Tap VoIP Manual EN v3.23 Aug 2021
http://vtapXXXX.local
For this V-Tap:
http://vtap019e.local
admin
and Show IP address.
© 2017-2021 Vidicode
, in which XXXX
11