Advertisement
Quick Links
T
he principle of the
ATEQ VT
is to start and
check retrieve data from all
smart devices mounted on
vehicle wheels. The instru-
ment checks their identi-
fiers and loads the vehicle's
onboard computer (OBC).
This instrument is the ideal
tool for low and medium
volume production line, and
off line repair stations.
Industrial smart tire pressure
devices tester (TPMS)
EASY OPERATION
LARGE GRAPHIC DISPLAY
LI-ION BATTERY
STRONG ABS CASE
LONG NOZE VERSION FOR
STAND-UP OPERATION
Main Features
Two versions: long and short noze
LF (TX) 125 kHz continuous or modulated (OOK)
RF (RX) 315 MHz or 433 MHz (optional 868 MHz)
Available with manchester or NRZ encoding (others on
request)
RF (TX) option on request with external directionnal
antenna (300 - 500 MHz)
LCD graphic display 65 mm x 32 mm
One LED per wheel (5)
Internal LI-ON battery charger
with external 24V power supply
CAN and RS232 network connector
Autonomy in normal use: 8 hours
Weight: 1.6 kg
Size: H x L x D: 285 x 155 x 870 with antenna
www.ateq.com
VT
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for ATEQ VT
Summary of Contents for ATEQ VT
- Page 1 Main Features Two versions: long and short noze he principle of the LF (TX) 125 kHz continuous or modulated (OOK) ATEQ VT is to start and RF (RX) 315 MHz or 433 MHz (optional 868 MHz) check retrieve data from all...
- Page 2 Pressing one of the following keys actuates the measurement cycle for the wheel concerned. To acquire all the identifiers of a vehicle, perform the operation for all the wheels in succession, in any order. Other TPMS products supplied by ATEQ Automatic production line units Antennas...
Need help?
Do you have a question about the VT and is the answer not in the manual?
Questions and answers