Table of Contents
Advertisement
RC3050 Antenna Controller
3.2.2 Auto Mode
The optional AUTO mode allows the user to initiate automatic stowing or deployment of the antenna.
3.2.2.1 Deploy
The DEPLOY mode automatically moves to the mount's predefined "deploy" position. The deploy
sequence will initially move in the elevation axis followed by the azimuth axis and finally in the polarization
(if enabled for a particular mount) axis. During the deploy sequence, the position of azimuth, elevation
and polarization will be displayed. See appendix A for the deploy position for a particular mount.
The automatic movement may be terminated anytime by pressing any key. Following completion of
movement to the deploy position, the RC3050 will return to MANUAL mode.
3.2.2.2 Stow
The STOW mode automatically moves to the mount's predefined "stow" position. The stow sequence will
initially move in the azimuth axis followed by the polarization (if enabled for a particular mount) axis and
finally in the elevation axis. During the stow sequence, the position of azimuth, elevation and polarization
will be displayed. See appendix A for the stow position for a particular mount.
The automatic movement may be terminated anytime by pressing any key. Following completion of
movement to the stow position, the RC3050 will return to MANUAL mode.
Research Concepts, Inc.; 5420 Martindale Road; Shawnee, Kansas 66218-9680 USA
Chapter 3
<UP>DEPLOY
AUTO
<DN>STOW
Az
El
Pol
180.0 –12.3 -90
<ANY KEY>STOP
Az
El
Pol
180.0 –12.3 -90
<ANY KEY>STOP
23
Detailed Operation
23
www.researchconcepts.com
Advertisement
Table of Contents
