Set Mode; Preset Satellite Names - RESEARCH CONCEPTS RC1500 Quick Start Manual

SET Mode

POS
ENTER TO PROCEED
MODE TO EXIT SET
SET mode allows a user to store a satellite name, position, and horizontal and
vertical polarization presets into the controller's non-volatile memory. Once a
satellite has been stored in non-volatile memory, it may be recalled using the
AUTO MODE
Note: The MODE key may be pressed at any time to exit the mode which is
currently active.
When SET mode is activated, the following screen is displayed.
POS
285 433
BRAZLST A1 SET

Preset Satellite Names

When the above screen is displayed, the ARROW keys may be used to jog the
antenna and the SPEED key may be used to toggle the jog speed. The SCROLL
UP and SCROLL DOWN keys may be used to select the satellite name (shown
on the second line the "Select" field which will be stored in non-volatile memory.)
POS
DUPLICATE ENTRY
REPLACE Y/N: SET
If the satellite name present in the "Select" field when the ENTER key was
depressed is already stored in non-volatile memory, the user is presented with
the above screen. If the user selects NO the initial screen is displayed and the
selection process is repeated.
RC1500B Quick Start Guide
SS
MODE
SS
MODE
SS
Mode
26
Set Mode