Table of Contents
Advertisement
16
RC3050 Antenna Controller
2.2.5 Waveguide Switch
J12 (DB-15 Female) connects the optional waveguide switch (RC3KF-WG-DRV1) module to a
waveguide switch of the type shown in the following diagram.
J12 4
I/O 2
14
Drive Out 2
15
12
Drive Return
9
Drive Out 1
10
3
I/O 1
1
Sensor Supply
2
Drive Out 1,2 provide 28 VDC to energize the waveguide switch.
NOTE: The RC3050 assumes the waveguide switch's position 1 is the horizontal (H) position. If
the H and V positions need to be reversed, both the position volts (9/10 and 14/15) and the
position indicator (3 and 4) lines need to be swapped.
Research Concepts, Inc.; 5420 Martindale Road; Shawnee, Kansas 66218-9680 USA
Pos 2 Indicator
Pos 2 Volts
Common
Motor
Pos 1 Volts
Pos 1 Indicator
Indicator Common
Waveguide Switch
(at Pos 1)
Chapter 2
16
Installation
www.researchconcepts.com
Advertisement
Table of Contents
