Error Codes - Shell SEV-32-01 Manual

ERROR CODES

Error code Problem
01
Product over-temperature OVER-TEMP
02
AC input under voltage
03
AC input over voltage
Outlet is not properly
04
grounded
05
Output over current
06
Ground Fault alarm
If the above solutions did not solve the problem, visit www.skyintelligent.com/support or
contact customer service.
Display
Solution
notice
The product will automatically stop
charging. Wait until the product
cools down, then use the product
again.
The product will automatically stop
charging. Wait until the voltage
LOW Vin
returns to optimal range, then use
the product again.
The product will automatically stop
charging. Wait until the voltage
OVER Vin
returns to optimal range, then use
the product again.
Switch off the product. Ensure the
UN-GND
outlet is properly grounded. Contact
qualified electrician if in doubt.
The product will automatically stop
charging. Switch the product off.
Unplug the product from the vehicle
OVER-CURR
and then from the outlet. Connect
the product to the vehicle and the
outlet. Set the correct output current.
GFCI Protection: The charger is
equipped with a Ground Fault Circuit
GFCI ERROR
Interruption (GFCI) reaction system to
protect against electric shock. If the
charger module detects an output
ground fault, please ask dealer and
manufacturer to check your EV.
NOTICE
15
appears on the display
2
.