Shell SEV-32-01 Manual page 12

Manual charging - Setting the output current
Display
2
Manual charging - Setting the delayed charging
Display
2
Operation
• Press and hold the current button
to enter the output setting.
• Press the current button
desired output current:
For 120 V:
12 A → 16 A
For 240 V:
SEV-32-01
12 A → 16 A → 24 A → 32 A
SEV-40-01
12 A → 16 A → 24 A → 32 A → 40 A
• Release the button and wait for 2 seconds to
confirm.
• The product starts charging automatically few
seconds after it is connected to vehicle's charging
socket.
NOTICE: The voltage is detected automatically and
cannot be changed by the user.
time
Operation
This mode allows to schedule a charge at night when
the electricity rates are lower.
• Press and hold the timer button
enter the time delay mode. The display
• Press the timer button
time. Choose from 1 to 24 hours.
• Release the button and wait for 2 seconds to
confirm.
NOTICE: To cancel the time delay mode, press and
hold the timer button
delay and the timer button indicators
11
for 2 seconds
repeatedly to select
for 2 seconds to
2
repeatedly to set the delay
for 2 seconds again. The time
go off.
blinks.