Selecting the party program
Activate the party mode if you wish to provide central heating at the standard
temperature for a short time, irrespective of the set operating mode and the
set switching times.
DHW will be heated in accordance with set switching times (see page 19).
Please note:
For systems with heating water buffer storage units, the party program will
only affect the heating circuits.
Activating party mode
Press the following keys:
1.
for "System parameters".
B
2.
C
for "Set party time".
Set party time
Party finishes at:
Tuesday 01.01.02
<
>
+
3. < / >
until the value to be set
is highlighted.
4.
/
until the required value
+
appears.
5.
OK
press to confirm; party
mode is now activated,
and the display shows
"PARTY".
or
BACK
if you do not want to
activate party mode.
End party mode early
Press the following keys:
1.
2.
3.
00:00
BACK
OK
for "System parameters".
B
C
for "Set party time".
YES
for "End party".
Quick start
9