S N O O Z E / D I M M E R O P E R A T I O N; Sleep Mode - iHome iBTW450 Manual

S E T T I N G A N D U S I N G T H E A L A R M S
(C o n t i n u e d )
REVIEWING, ARMING/DISARMING AND RESETTING THE ALARM
Press and release the Alarm Button at any time to review the current alarm
settings. To toggle the alarm on or off, press the Alarm Button as needed.
When the alarm icon is displayed, the alarm is armed/on.
Press the Power Button or Alarm Button when the alarm is sounding to
reset it to come on again at the same time the next scheduled day. (For
example, if your alarm schedule is set to Wake Weekday and you reset the
alarm on Friday, it will come on again on Monday, not on Saturday.)

S N O O Z E / D I M M E R O P E R A T I O N

1. To program a custom snooze duration, during normal operation (when
alarm is not sounding) press and hold the Snooze/Dimmer Button until
the display flashes, then press the + or – Buttons on the unit to adjust the
snooze time to 1 - 29 minutes.
2. Press the Snooze/Dimmer Button on the iBTW450 after the alarm sounds.
The alarm will be silenced and will come on again in about 9 minutes
(default). You may repeat this cycle several times during the one hour
alarm cycle.
3. During normal operation (when alarm is not sounding), press the
Snooze/Dimmer Button to control the brightness level (8 steps, HIGH to
OFF settings) of the LCD display and buttons.
S L E E P M O D E
Sleep mode lets you sleep to your playing Bluetooth or Aux-in device for the
set sleep duration, then turns the unit off. Press the Sleep Button as needed
to cycle to the desired sleep duration: 120, 90, 60, 30 or 15 minutes or OFF
(turns unit off). Press the
level (sleep level volume is independent from normal volume levels). Press
the Sleep Button during sleep to view the remaining sleep time; press again
to set sleep to next (lower) sleep duration.
7
or Button on the unit to adjust sleep listening