Hydraulic Hose Connections - MASSEY FERGUSON 9831 Service Manual

FIG. 3: Remove the lamp harness from the harness
holder (1). Connect the lamp harness into the tractor
receptacle.

Hydraulic Hose Connections

Frame Lift/Lower Circuit Hoses
FIG. 4: Connect the 5/8 inch ID raise hose (1) to the
tractor outlet showing an extended cylinder. Connect the
5/8 in ID lower hose (2) to tractor outlet showing a
retracted cylinder.
IMPORTANT: Clean off hose ends and tractor couplers
to remove dirt before making connections.
Hitch Height/Marker/Fold Circuit Hoses
FIG. 5: Connect the 1/2 inch ID lower hose to the tractor
outlet showing an extended cylinder.
Connect the 1/2 inch ID raise hose to the tractor outlet.
m
WARNING: Purge all air from hydraulic
system including cylinders. Check fluid
level in tractor after purging. Failure to do
so could result in personal injury and/or
damage to equipment.
IMPORTANT: Before raising, lowering, unfolding or
folding the planter, make sure hoses and
electrical harnesses cannot be pinched and
damaged during the operation.
4283532M1
Field Operations and Adjustments
1
FIG. 3
2
FIG. 4
FIG. 5
M118959
1
M104811
M104811
01-17