MASSEY FERGUSON MF 7360 Workshop Service Manual
  1. Manuals
  2. Brands
  3. MASSEY FERGUSON Manuals
  4. Farm Equipment
  5. MF 7360
  6. Workshop service manual
MASSEY FERGUSON MF 7360 Workshop Service Manual

MASSEY FERGUSON MF 7360 Workshop Service Manual

Combines
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Workshop Service Manual
Combines
MF 7360 - MF 7370
Breganze
March 2018
AGCO S.p.A. - Via F. Laverda, 15/17 - 36042
LA327301015M_MF7360-7370_EN
BREGANZE (VI) – Italy.
EME
© AGCO 2018
English

Advertisement

Table of Contents
loading

Related Manuals for MASSEY FERGUSON MF 7360

Summary of Contents for MASSEY FERGUSON MF 7360

  • Page 1 Workshop Service Manual Combines MF 7360 - MF 7370 Breganze March 2018 AGCO S.p.A. - Via F. Laverda, 15/17 - 36042 LA327301015M_MF7360-7370_EN BREGANZE (VI) – Italy. © AGCO 2018 English...
  • Page 2 Find manuals at https://best-manuals.com...
  • Page 3 TABLE OF CONTENT Preface General Information - 00 Engine - 10 Drive transmission - 14 Transmission - 21 Front drive axle - 25 Hydrostatic transmission - 29 Brakes - 33 Hydraulic system - 35 Steering - 41 Axles and wheels - 44 Cab air conditioning system - 50 Electrical system - 55 Attachments/Headers - 58...
  • Page 4 Table of contents 1 Preface Introductory notes ........... . . 1-3 Important warnings .
  • Page 5 Table of contents Combines LA327301015M_MF7360-7370_EN Find manuals at https://best-manuals.com...
  • Page 6 1. Preface GUID-645192D5-7F9B-4756-9D27-32FAF1460CFA [V1] 1.1 Introductory notes • This manual is divided into sections numbered with two-digit numbers, each section having independent page numbering. For quick reference, these sections have the same identification number and description as the relevant Flat Time Rate Manual. •...
  • Page 7 1. Preface GUID-6A968CF6-57C5-478A-8E25-994687984E8C [V1] 1.2 Important warnings • Warning: Some of the models listed in this manual are not marketed in your country. For more details, contact your dealer. • All repair and maintenance work listed in this manual must be carried out exclusively by the AGCO Service Network, in strict compliance with the instructions provided and using, where necessary, the special tools required.
  • Page 8 • Part 2 (c), made up of 5 digits "10001", which increase in numerical order of production and identify the sequential number of the produced machine model. For model MF 7360 *5539*55391..* For the MF 7360 PL/MF 7360 PLI models *5540*55401..* For model MF 7370 *5640*56401..* For the MF 7370 PL/MF 7370 PLI models *5641*56411..
  • Page 9 1. Preface FreeFlow grain header identification number For the 16 ft (m 4.80) model 7116..For the 18 ft (m 5.40) model 7118..For the 20 ft (m 6.00) model 7120..For the 23 ft (m 7.00) model 7123..

  • Page 10: Table Of Contents

    Table of contents 2 General Information - 00 General instructions ........... . 2-3 Safety precautions .
  • Page 11 Table of contents 2.16.26 Hydraulic components - RD ......... . 2-263 2.16.27 Hydraulic components - TK .
  • Page 12 2. General Information - 00 GUID-24F59A6F-3896-45C9-A158-22FFFD1260EE [V1] 2.1 General instructions Important caution All repair and maintenance works described in this manual must be carried out only by the AGCO Service Network, strictly complying with the instructions given and using, whenever required, the special tools. Anybody who carries out the above operations without scrupulously complying with the instructions shall be held personally liable for any damage caused as a result of their actions.
  • Page 13 2. General Information - 00 • machine model (commercial name) and frame number; • combine type and number; • part number of the ordered part, which can be found in the ”Spare Part Catalog” , used for order processing. Notes on tools The tools that AGCO suggests and describes in this manual: •...

  • Page 14: General Information

    2. General Information - 00 GUID-994B500C-64BF-4915-B0E1-D592DA6C597A [V1] 2.2 Safety precautions WARNING: PAY CAREFUL ATTENTION TO THIS SYMBOL This warning symbol points out important messages involving your personal safety. Carefully read all the suggested safety precautions to avoid potential hazards and safeguard your health and personal safety.
  • Page 15 2. General Information - 00 • Brakes are ineffective when manually released for service interventions: in these cases, make sure you keep the machine under control using suitable chocks or similar blocking devices. • The fuel supply gun must always stay in contact with the filler neck: Maintain this contact until the fuel supply stops to prevent sparks due to static electricity build-up.
  • Page 16 2. General Information - 00 Starting • Never run the engine in closed areas without suitable ventilation systems to remove exhaust gasses. • Never put your head, body, arms, legs, feet, hands or fingers near fans or rotating belts. Engine •...
  • Page 17 2. General Information - 00 • Do not twist metal chains or ropes. Always wear safety gloves when handling cables or chains. Combines LA327301015M_MF7360-7370_EN...

  • Page 18: Use Of The Combine

    2. General Information - 00 GUID-7FAABE2A-1A2E-45A8-A6C4-35B335D42FC4 [V1] 2.3 Use of the combine The combines X5, X5AL, X5BL, X6, X6AL and X6BL are designed as self-propelled units with a diesel engine. The machines are manufactured exclusively for usual agricultural purposes, i.e. for harvesting cereal, seed, rice, maize, soya, etc.
  • Page 19 2. General Information - 00 Only your Dealer is authorized to intervene on the machine software. The machine's maximum speed on the road is limited and controlled by the software. Do not try to change Table types These combine harvesters may use FreeFlow or PowerFlow cutting tables. NOTE: In this manual, the term "table/s"...

  • Page 20: Technical Specifications

    2. General Information - 00 2.4 Technical specifications GUID-B7778371-5452-4146-B106-04E4DF13DAB2 [V1] 2.4.1 Weight Models X5 – X6 Unladen weights Units of measure ment Total weight of the 2WD combine without 13500 14,000 header, with straw chopper, with the grain tank empty and without ballast Front weight 8500 8800...
  • Page 21 2. General Information - 00 Unladen weights Units of X5AL X5BL measure ment Total weight of the 4WD combine without 14800 15200 header, with straw chopper, with the grain tank empty and without ballast Front weight 9200 9700 Rear weight 5600 5500 Models X6AL –...

  • Page 22: Dimensions

    2. General Information - 00 Model X6 with rubber track (ATRAK) Unladen weights Units of measuremen Total weight of the 2WD combine without header, with 17 ,200 straw chopper, with the grain tank empty and without ballast Front weight 11,600 Rear weight 5600 Total weight of the 4WD combine without header, with...

  • Page 23: General Features - X5 - X6 Models

    2. General Information - 00 (*) with ATRAK rubber tracks GUID-69968932-CED6-4C89-A48D-D34793CA4C65 [V2] 2.4.3 General features - X5 - X6 models Feeding unit Unit grain header (FF type) Cutting table Min.and max. cutting height 50 ÷ 1320 Cutting width 4.80 / 5.40 / 6.00 / 7 .00 /7 .60 Cutting frequency strokes/min 1244...
  • Page 24 2. General Information - 00 Feeding unit Unit Upper shaft speed Lower shaft speed Elevator drive belt 3HB multiple V-belt Threshing sys. Unit At concave inlet with cut-out option and the Stone trap possibility to remove it (for inspection) Threshing drum Type: wheat/maize with 8 cylinder rasp bars and 8 backing bars Type: rice...
  • Page 25 2. General Information - 00 Threshing sys. Unit Threshing section 1 (with three rows of spikes) Spikes Wrap angle ° Universal type: Bars Wire diameter Wrap angle ° Concave extension (rake) Bars Wrap angle ° Rear beater Vanes 4 - removable from inside the grain tank Control 4HB multiple V-belt Speed empty/loaded...
  • Page 26 2. General Information - 00 Threshing sys. Unit Area 0.46 0.54 Clearance Multi Crop Separator to concave 25 ÷ 40 clearance Straw walkers Grids and steps 5 and 4 Length 4256 Separation area 5.73 6.81 Speed Cleaning unit Unit with adjustable air capacity Fanning Mill Speed 350 ÷...
  • Page 27 2. General Information - 00 Cleaning unit Unit to cylinder Tailings Conveyed by tailings auger and elevator Auger rotation speed Grain tank Unit Crop conveyed by Tank filling elevator and tank filling auger into the middle of the grain tank Unloading auger speed Capacity 9000...
  • Page 28 2. General Information - 00 Hydraulic system Unit Anti-shock valve max. pressure Filter on hydraulic tank micron Reel speed Pump capacity liters/min Max. pressure Filter on hydraulic tank micron Hydrostatic system Unit Oil tank capacity (combined) Pump displacement /rev Pump speed 2620 Pressure relief valve setting Motor displacement...

  • Page 29: General Features - X5Al - X5Bl - X6Al - X6Bl Models

    2. General Information - 00 Engine Unit DEF tank capacity Fuel tank capacity Radiator Circuit capacity Electrical components Unit Battery 12 V type Peak current 1300 Starter motor Type Alternator Type Charging capacity Transmission Unit With front engagements Gearbox Gears GUID-7402F29A-ACCB-422F-9F06-AE552F366ACE [V2] 2.4.4 General features - X5AL - X5BL - X6AL - X6BL models Feeding unit...
  • Page 30 2. General Information - 00 Feeding unit Unit X5AL X5BL X6AL X6BL Drive trains hydraulic Vertical and horizontal electrohydraulically operated adjustment Speed variator hydraulically controlled (speed: 0–55 rpm for grain and 0–40 rpm for rice) grain header (PF type) Cutting table Min.and max.
  • Page 31 2. General Information - 00 Threshing sys. Unit X5AL X5BL X6AL X6BL Diameter Variator with 1 belt with 2 belts Variator control electrohydraulic Speed 380 ÷ 1100 430 ÷ 1210 Concave Control Front and rear opening, independently adjustable from the operator seat Area 0.83 0.99...
  • Page 32 2. General Information - 00 Threshing sys. Unit X5AL X5BL X6AL X6BL Rear beater Vanes 4, removable from inside the grain tank Control 4HB multiple V-belt Speed empty/loaded Rear beater grid Concave wrap angle ° Concave area 0.44 0.53 Bars Clearance Wire diameter Concave to rear beater clearance...
  • Page 33 2. General Information - 00 Cleaning unit Unit X5AL X5BL X6AL X6BL with adjustable air capacity Fanning Mill Speed 350 ÷ 1050 Reduced speed 270 ÷ 840 Vanes Control V-belt fixed, with rear access for maintenance Main grain pan Movement Alternating, opposite to bottom sieve Con rod strokes/min...
  • Page 34 2. General Information - 00 Grain tank Unit X5AL X5BL X6AL X6BL Torque limiter Shear bolt Length of unloading tube 5.00 Unloading speed liters/sec Hydraulic system Unit X5AL X5BL X6AL X6BL Oil tank capacity (combined) Table up/down - Reel up/down and fore/aft - Grain unloading auger opening/closing - Shuttle Pump capacity liters/min 35.5...
  • Page 35 2. General Information - 00 Hydrostatic system Unit X5AL X5BL X6AL X6BL Oil tank capacity (combined) Pump displacement /rev Pump speed 2450 Pressure relief valve setting Motor displacement /rev Return filter micron Pressure filter micron Engine Unit X5AL X5BL X6AL X6BL Make AGCO POWER...
  • Page 36 2. General Information - 00 Electrical components Unit X5AL X5BL X6AL X6BL Battery 12 V type Peak current 1300 Starter motor Type Alternator Type Charging capacity Transmission Unit X5AL X5BL X6AL X6BL With front engagements Gearbox Gears Combines 2-27 LA327301015M_MF7360-7370_EN...

  • Page 37: Lubrication

    2. General Information - 00 GUID-EDDD56A7-43BB-4459-8EC7-00C270D7D5E0 [V1] 2.5 Lubrication Parts to be filled Quantity Recommended International (liters) products specification Engine cooling system Antifreeze (50% water) ASTM D 3306 • models X5 - X5AL - X5BL • models X6 - X6AL - X6BL Fuel tank Cleaned and filtered See the Permitted fuels...
  • Page 38 2. General Information - 00 Parts to be filled Quantity Recommended International (liters) products specification Air conditioning system 2300 grams R134a — Grease nipples MF Grease EP NLGI 2 Windshield wash 1.50 — — ) For (ATRAK) rubber tracks, refer to the specific Operator's Manual. ) Hydraulic tank, 36 liter capacity Combines 2-29...

  • Page 39: Service Intervals

    2. General Information - 00 GUID-365B1CE9-8367-4258-B6ED-D40E02888D9D [V2] 2.6 Service intervals Engine Oil check every 10 running hours or every day Coolant check every 10 running hours or every day Oil and oil filter change after the first 50 running hours (when the machine is new), then every 250 hours or once a year Coolant change every 2000 running hours or every two years...
  • Page 40 2. General Information - 00 Brake system Brake fluid check every 50 running hours Brake fluid change every 2000 running hours or every two years Air conditioning system Dehydrator filter replacement every 500 running hours Air compressor (optional) Oil change every 500 hours or once a year Windscreen wash fluid reservoir Level control...
  • Page 41 2. General Information - 00 Parts to lubricate Angle gear for chaff spreader to be greased every 100 running hours Unloading auger control cylinder to be greased every 100 running hours Main crop elevator adapter to be greased every 100 running hours MCS belt tensioner to be greased every 100 running hours Threshing unit belt tensioner...

  • Page 42: Combine Dimensions

    2. General Information - 00 GUID-805A663A-29E3-4119-B036-5C4DD488DF1D [V1] 2.7 Combine dimensions Model X5 with tires GUID-6CF21E15-C7D0-46AA-A184-450E1A50BFFB-high.jpg [High] Fig. 1 Dimensions are in mm. The values in brackets refer to the 4 WD version. The front wheel track varies according to the type of tire used. See the Tire equipment table in this section The rear track is adjustable.
  • Page 43 2. General Information - 00 X5 model with metal/rubber tracks GUID-F3B96298-FC2F-4FDF-A609-5CBE777DCD23-high.tif [High] Fig. 2 Dimensions are in mm. The values in brackets refer to the 4 WD version. Maximum overall dimensions of tracks = 3630 mm Maximum overall dimensions of machine = 3800 mm 2-34 Combines LA327301015M_MF7360-7370_EN...
  • Page 44 2. General Information - 00 Model X5AL GUID-567399CA-8274-4740-90D8-D9FA27B4DB28-high.jpg [High] Fig. 3 Dimensions are in mm. The values in brackets refer to the 4 WD version. Combines 2-35 LA327301015M_MF7360-7370_EN...
  • Page 45 2. General Information - 00 Model X5BL GUID-0765075B-FAF1-43A7-A1A5-9A1901F82DB7-high.tif [High] Fig. 4 Dimensions are in mm. 2-36 Combines LA327301015M_MF7360-7370_EN...
  • Page 46 2. General Information - 00 Model X6 with tires GUID-3D3365C3-40CE-4D01-92D6-833075C5711C-high.tif [High] Fig. 5 Dimensions are in mm. The values in brackets refer to the 4 WD version. Combines 2-37 LA327301015M_MF7360-7370_EN...
  • Page 47 2. General Information - 00 X6 model with metal/rubber tracks GUID-8B7B6059-A8BD-487B-A785-6FC4FDC8F8E8-high.tif [High] Fig. 6 Dimensions are in mm. The values in brackets refer to the 4 WD version. Maximum overall dimensions of tracks = 3885 mm Maximum overall dimensions of machine = 4050 mm 2-38 Combines LA327301015M_MF7360-7370_EN...
  • Page 48 2. General Information - 00 X6 model with rubber tracks (ATRAK) GUID-41D98117-16CD-4357-9297-B00A26042FE0-high.jpg [High] Fig. 7 Dimensions are in mm. The values in brackets refer to the 4 WD version. Combines 2-39 LA327301015M_MF7360-7370_EN...
  • Page 49 2. General Information - 00 Model X6AL GUID-44BFA1FB-5C1C-44FC-8171-E46C81598EAE-high.jpg [High] Fig. 8 Dimensions are in mm. The values in brackets refer to the 4 WD version. 2-40 Combines LA327301015M_MF7360-7370_EN...
  • Page 50 2. General Information - 00 Model X6BL GUID-4A02184A-5CE3-4CE1-B6D9-3D12D5BA8D90-high.jpg [High] Fig. 9 Dimensions are in mm. Combines 2-41 LA327301015M_MF7360-7370_EN...
  • Page 51 This as a preview PDF file from best-manuals.com Download full PDF manual at best-manuals.com...

This manual is also suitable for:

Mf 7360 plMf 7360 pliMf 7370Mf 7370 plMf 7370 pli

Table of Contents