Table of Contents
Advertisement
Field Operations and Adjustments
Folding Procedure
Start the tractor engine, release the brakes and shift to
neutral. With the PLANT/OFF/TRANSPORT switch in
plant and the marker switch off, fully raise the planter
using the tractor hydraulic valve.
Change the PLANT/OFF/TRANPORT switch to transport,
press and hold the tongue height switch. Raise the
tongue with the tractor valve to disconnect the tongue
latch.
Press and hold the WING FOLD switch, then fold the
planter wings to the tongue with the tractor valve.
When the wing latches are near the tongue, press the
TONGUE HEIGHT switch and lower the tongue until the
latches clear the wing receiver. Finish folding the wings,
then raise the tongue to lock the wings into the receiver.
Stop the tractor, engage the parking brake, and install the
transport wheel cylinder and tongue cylinder lockup
channels. Also install the wing lock pins.
Start the tractor, depress the WING WHEELS switch,
then raise the wing wheels until contact is made with the
hitch.
Turn the control box switch OFF.
FIG. 10: Wings are folded and hooked into the wing
3
receiver (1) and secured by the wing latch (2). Install the
lock pins (3). Planter is now folded, raised and ready for
transport.
2
1
650057
FIG. 10
4283529M1
01-25
Advertisement
Table of Contents
