Table of Contents
Advertisement
Safety
Standard Markers
FIG. 10: With markers fully raised, insert lockup pin (1)
through the marker support and marker arm as shown.
Install a pin clip.
m
WARNING: Always pin markers in raised
position when working around, storing or
transporting planter.
During marker operation, store a pin in the support to act
as an upper limit stop for the marker arm.
Folding Wings
FIG. 11: On vertical fold models, raise the wings and
install L-pins (1) and pin clips (2) in each lockup assembly
as shown.
m
WARNING: Always engage lockups when
transporting planter.
m
WARNING: Do not raise wings into wires or
other overhead objects.
When wings are lowered, store L-pins and clips in lockup
storage (3) as shown.
01-10
FIG. 10
2
3
FIG. 11
1
G808015
1
G807014
4283411M1
Advertisement
Table of Contents
