Installation Using The Magnet - Contec AI-1608VIN-USB Reference Manual

5. Installation Using the Magnet

Attaching the magnet (optional) with the product makes it easy to mount or remove the product on
or from a metal surface such as steel desk or partition.
Do not let the magnet go near objects that can be affected by magnetic fields, such as

monitors and floppy disks.
If the product is shifted while mounted on the steel surface, the surface paint may be

scratched.
 Mounting/ removing the magnet
Mounting the magnet
To mount the magnet, press down the entire length of the magnet into its mounting hole while
pushing the magnet in the direction of arrow 1. Next, slide the magnet in the direction of arrow 2 to
fix it in position.
Removing the magnet
To remove the magnet, slide the magnet in the direction of arrow 1 as shown in the following figure,
and then lift it out in the direction of arrow 2.
—
Installation
AI-1608VIN-USB / AI-1608AIN-USB Reference Manual
CAUTION
— 43 —
—