Contec AI-1608VIN-USB Reference Manual page 63

4
Start up the Utility.
Start up CONTEC Device Utility.
(The utility can be found in Utility folder of API-AIO(WDM) for USB driver.)
5
Write firmware.
Select the product from the list, and perform updating firmware.
6
Remove the product.
First, unplug the USB cable connected to the product.
Then, unplug the external power supply (such as the AC adapter) for self-power.
7
Set Module ID back to the former ID.
Set Module ID back to the former ID that was set before updating firmware.
8
You have now finished Updating Firmware.
—
Software
AI-1608VIN-USB / AI-1608AIN-USB Reference Manual
— 63 —
—