Cabletron Systems SmartSwitch 1800 User Manual page 9

PU Status Panel
Data Displayed
Function Key Operations
Supplemental Software User Guide
S ervice Point: BD0NV SP
Line name: LIN E4
PF 1-Help 2-Exit 3-En d 4-PU S tats 6-Con fig 7-A ct 8-D eact 10-Disp lay 11-R efresh
SDLC
PU Actual
Name Status
PU C3 ACTI V
– is the PU Name configured in the Cabletron device SNA Port record.
PU Name
– is the current status (active or inactive) of the PU.
SDLC Actual Status
– is the Istatus (active or inactive) configured on the PU parameters
Desired Status
screen of the SNA Port record.
– is the Local SAP Address configured on the LLC2 Parameters screen
POLL ADDR
of the SNA Port record.
– is the current status (active or inactive) of the LLC2 session.
LLC2 Actual Status
LANCON Status – is not applicable. (This is from part of the software that is shared
with Netlink's SDLC Link Server.)
– is the Local MAC Address configured on the LLC2 Parameters screen
MAC Address
of the SNA Port record.
– is the ID created from IDBLK and IDNUM in the SNA Port record.
XID
Pressing one of the function keys listed below will perform the appropriate operation
from the PU Status panel:
– will display the Help panel (Figure 2).
[PF1] Help
– will return you to the Line Status panel (Figure 3).
[PF3] End
PU S tatus Pan el Version: 3200|
LLC2
Desired POLL Actual LAN CON
Status ADD R Status Statu s
ACTI V C3 ACTI V AC TIV
Figure 4 PU Status Panel
MAC A ddress X ID
FFFFFFFFDCE3 00D CE301
5